Water damage can be a major hassle because it can drastically alter the state of your home or furniture. If ignored, your belongings and home could be irreparably damaged. Furthermore, it may lead to mold growth, severely affecting your property’s air quality and posing a health risk to the people who live there.
Things that have been harmed by water usually cannot be repaired quickly. This is because, as time goes on, they naturally weaken, grow more fragile, and are more susceptible to further harm from bacteria and the weather. However, there is still hope for a simple and safe repair of water damage to wood.
Saving Wood Furniture from Water Damage
By learning how to repair water damage to wood furniture, you may save your treasured belongings and, in some cases, avoid spending money on replacements. Fast response coupled with commonplace products can help your furniture last for years. If you need tips on saving your furniture after it has been damaged by water, read on.
1. Dry Your Furniture
The swelling of water-damaged furniture can often be reduced by just letting it dry out. Dry the wet furniture as soon as possible. Exposure to the sun is the standard way of drying wood. However, after some time of utilizing this procedure, you will need to flip the wood over. Prolonged exposure to sunlight can cause wood to shrink, split, and warp.
Using electric fans and keeping the wood furniture in a place with adequate ventilation for at least 24 hours is an additional method for drying wood.
If you contact this team, you can be assured of the quality of work and the dedication of the workers working to restore your property.
2. Use an Iron or Hair Dryer
Use an iron to dry wet wood. Placing a clean towel over the affected area and ironing it on the lowest heat should do the trick. For best results, iron over the towel for 15 minutes or until the absorbent fabric shows signs of drying out. Keep the iron moving to prevent burning.
An alternative to iron is a hair dryer set to its lowest heat setting. Always keep it a safe distance (about six inches) from the wood’s surface, and move it around, so it stays cool in any location. Continue doing this until there are no water bubbles and the wood is completely dry.
3. Remove Water Bubbles
Water bubbles on the wood’s surface can be removed with a printer or needle. You can release the water from the bubble by simply poking a needle or piece of paper.
Making holes in the water bubbles can help release the air and water that have become trapped in the swollen wood furniture. Continue doing this until the wood is completely dry and there are no more bubbles. It’s a straightforward approach to removing water bubbles without damaging the wood.
In cases of property damage, reputable firms like Coconut Grove restoration company can remediate the damage and restore your property in no time.
4. Sand and Finish
You can sand and finish the swollen furniture once it has dried. Wear protective gear to prevent injury, including goggles, gloves, and a mask. You can eliminate the swelling with coarse sandpaper if the wood is still swollen. Sanding too much can cause an uneven surface.
Then, sand the whole piece of furniture with finer grit sandpaper. In doing so, any rough places in the wood can be removed, and the wood can be readied for finishing. After you’re done sanding, you can seal or paint the wood.
5. Flatten the Wood
Once the wood is dry and finished, you can use a wood flattening tool to remove any remaining water damage. This will aid in restoring the wood to its original form and protect it from future wear and tear. Take precautions by wearing goggles, gloves, and a mask to prevent injury.